1) The DC voltage must match;
Each inverter has a nominal voltage, such as 12V, 24V, etc.,
It is required that the battery voltage selected must be consistent with the nominal DC input voltage of the inverter. For example, a 12V inverter must choose a 12V battery.
2) The output power of the inverter must be greater than the maximum power of the appliance;
In particular, some equipment that requires a large amount of starting energy, such as motors, air conditioners, etc., require additional power margin.
3) The positive and negative poles must be connected correctly
The DC voltage connected to the inverter is marked with positive and negative poles. In general, red is positive (+), black is negative (-), the battery is also marked with positive and negative, red is positive (+), black is negative (-), and must be connected to positive (red to red) ), negative to negative (black to black). The diameter of the connecting wire must be thick enough, and the length of the connecting wire should be reduced as much as possible.
4) The charging process and the inverter process cannot be carried out at the same time to avoid damage to the equipment and cause malfunctions.
5) The inverter shell should be grounded correctly to avoid personal injury caused by leakage.
6) In order to avoid electric shock injuries, it is strictly prohibited for non-professionals to disassemble, repair or modify the inverter.


