All in One Solar ESS

Name: China Customized All in One Solar ESS Wholesale - Low Price All in One Solar ESS in Stock - Raysol New Energy
Brand: Raysol
SKU: 221762692

50KW/100kWh outdoor all-in-one ESS, 50KW hybrid solar inverter+100KW CATL LFP battery built-in EMS for commercial solar system, with parallel function to maximum 1MW 2MWH

Send Inquiry

PRODUCT INTRODUCTION

Product Introduction:

The ALL-IN-ONE Eenery Storage System with 50KW 100KWH is a high-performance integrated renewable energy storage solution that provides reliable, safe and easy power supply for commercial buildings, and industrial facilities, with string-like module design for easy parallel to expand the capacity as much as needed.

50kW/100kWh outdoor All-in-one ESS cabinet

Highlight:Safe&Reliable
*CATL LFP battery cell

*Double fire suppression system design

*1+1 redundancy design
Simple&User-friendly

*Pre-installed in factory for easy installation on site *

Integrated BMS/EMS, suitable for various
applications

*Effortless operation, cloud control
Economical&Efficient

*100% DOD, improving ROI

*Save Capex, expanding as required

*Efficient and energy-saving HVAC design

Inverter Parameters:

Product Specification		KAC50DP
PV Side
Max. input voltage		1000V
MPPT voltage range		300V~750V
Max. current per MPPT		25A
Number of MPPT		3
Number of inputs per MPPT		2
Battery side
Max. input voltage		350V
Min. input voltage		350V
DC voltage at nominal operation		500V~750V
Max. DC Current		50A*2
Max. DC input power		55KW
Number of DC inputs		2
AC side(On grid)
Nominal AC output power		50KW
Max. AC output power		55kVA
Max. AC current		80A
Nominal AC voltage		400V
AC voltage range		360V~440V
Nominal grid frequency/frequency range		50/60Hz±5Hz
THDv		<3%(100% load)
Adjustable PF range		-1(lagging)~1(leading)
AC side(Off grid)
Nominal AC voltage		400V±3%
THDv		<3%(linear load)
Nominal grid frequency/frequency range		50/60Hz
Nominal AC output power		50kW
Max. AC output power		50KVA
Efficiency
Max. efficiency		97.5%
Protection
Reverse connection protection		Yes
DC switch		Yes
AC switch		Yes
Over-temperature protection		Yes
Grid monitoring/ Earthing fault detection		Yes
Insulation monitoring		Yes
Surge protection		DC Type II;AC Type II
General parameters
Dimensions(WxDxH)		650715325mm
Weight		62KG
Topology		Transformerless
IP protection		IP65
Operation temperature range		-25~60℃(>45℃ derating)
Operation humidity range		0~100%(no condensing)
Cooling method		Intelligent air cooling
Max. operation altitude		4000m(>3000m derating)
Communication port		RS485/CAN
Standards		IEC 62477,IEC61000,CE,GB/T

Battery Cabinet Parameters:

Battery type	LFP (produced by CATL)
Battery module capacity	5.12kWh
Number of modules	10*2
Total battery capacity	102.4kWh
Nominal voltage	512V
Operating voltage range	448V~576V
Charge/Discharge rate	Max. 0.5C
DoD	100%
General parameters
Dimensions(WxDxH)	1100 x 1080 x2380 mm
Weight	<1.5T
Installation site	Outdoor
IP protection	IP54
Anti corrosion level	C4
Operation humidity	0%~95% (No condensing)
Operation temperature	-30°C~+50°C
Max. operation altitude	4000m(>3000m derating)
Communication port	Ethernet;CAN
Communication protocol	CAN;MODBUS TCP/IP
Cooling method	Air conditioner
Standards	IEC62619-2017;UN38.3;IEC61000-6-2/4

Build-in Fire extinguishing system and HVAC system

Automatic and fast response fire extinguishing system on both module and cabinet level

ALL IN ONE ESS 6 ESS HAVC SYSTEM

Module Level: Highly efficient and environment-friendly fire suppressing Perfluoro(2-methyl-3-pentanone)(NOVEC 1230) are placed in each module and utilized with automatic and quick response with abnormal temperature captured by the built-in sensor. The effect can be brought down to the minimal level with this inside out fire extinguishing method.

Cabinet Level: Dual aerosols fire suppression design at the corner of the cabinet level can protect the cabinet of 3.3 m3 from electrical fire and re-ignition hazards.

String Parallel for Easy Expansion

all in one expansion